Search Site
In my Shopping Cart:
Shopping Cart Total: NZD
You are Here: Products / CB Radios / UHF CB Radios

GME CP40 Commercial 5 watt analogue portable radio

NZD569.25 inc GST (NZD495.00 + GST) All prices on this website are in NZD


Designed, engineered & manufactured in Australia the CP40 come outs of the box pre-enabled with 80CB/ PRS open channels and can support an additional 119 private (commercial frequency) channels with a maximum power output of 5W.

The CP40 is well suited for all types of entry-level commercial applications with practical features such as voice channel announcement, 45 channels per second scanning, 19 hour standard talk time and up to 1.5 Watt audio output.

Built to military-grade standards, the CP40 is dust & drop resistant as well as waterproof to a depth of one metre for 30 mins (IP67 Ingress Protection) and comes backed with GME Commercial’s standard 5-year Warranty 

Calculate your shipping

You currently don't have any products in your cart.

For a shipping estimate on this product, please select your region from the dropdown.



Frequency Range: 450–520 MHz
Number of Channels: 199 (80 CB)
Number of Zones: 10
Channel Bandwidth: 12.5 kHz
Emission: 8K50F3E
Antenna Impedance: 50 Ohms
Input Impedance (Mic): 2.2k Ohms
Output Impedance (Audio): 8 Ohms
Supply Voltage: 7.4 V DC
Battery Type: Li-ion Battery Capacity: 2600mAh
Current Drain (Approx.): Standby: 0.1A, TX 5W: 1.7A

Accessories Available

ANTENNA AE4028: 450-520 MHz Wideband Antenna to suit CP40/ CP50 Series
BATTERY BP028: 2600 mAh Li-Ion Battery to suit CP40/ CP50 Series
BELT CLIP & CASES MB058: Belt Clip to suit CP40/ CP50 Series
CC28: Nylon Case to suit CP40/ CP50 Series
LC009: Heavy Duty Leather Case to suit CP40/ CP50 Series


BCD022: 240V Single Unit Desktop Charger to suit CP40/ CP50 Series
BCD023: 240V Dual Unit Desktop Charger to suit CP40/ CP50 Series
PS005: AC Adaptor for BCD022 & BCD023
BCM002: 6-Bay Multi Charger to suit CP40/ CP50 Series
BCV012: Car Kit Charger to suit CP40/ CP50 Series with 12 Volt Adaptor


MC012: IP67 Remote Speaker Microphone to suit CP40/ CP50 Series
HS016: G-Hook in Ear Microphone to suit CP40/ CP50 Series


LS009: USB Programming Lead to suit CP40/ CP50 Series

RF Output: 5W/ 1W
Frequency Stability: ± 2.5 ppm
Modulation: FM Spurious Emission: -34dBm
Maximum Deviation: ± 2.5 kHz (NB) / ± 5 kHz (WB)
Audio Harmonic Distortion: 0.4% @ 1kHz/ 1.5k Deviation
Adjacent Channel Power: -67dBm FM Hum and Noise (with CCITT Filter): -50.8dB Residual Modulations (with CCITT Filter): -49.7dB


Sensitivity: 12 dB SINAD: -120 dBm
Intermediate Frequencies: 38.85 MHz 450k
Spurious Response: 71 dB Adjacent Channel Selectivity: 61 dB
Power Output: 1.5W (internal) 750mW (external)
Aux Port Audio Signal to Noise: 34dB (SINAD)
Audio Hum and Noise (with CCITT): -44dB
Receiver Frequency Response: Meets AS/ NZS 4295
Hum and Noise (without CCITT Filter): -38dB 


MIL-STD 810G Standard Method Procedure

High Temperature 501.5 i, ii
Low Temperature 502.5 i, ii
Temperature Shock 503.5 i
Rain Blowing/Drip 506.5 i, iii
Humidity 507.5
Salt Fog 509.5
Dust Blowing 510.5 i
Immersion 512.5 i
Vibration 514.6 i
Shock 516.6 i, iv 


Dimensions: 128mm (H) x 59mm (W) x 42mm (D) (not including antenna)
Weight: 337 grams (with battery and antenna)
Operating Temperature Range: -20 to +60 Deg C
Ingress Protection: IP67 (dust tight and waterproof)
Accessory Connector: Dual Jack

Please wait...